AnyCheck Dental Implant Stability Meter

AnyCheck Dental Implant Stability Meter

Features:

AnyCheck Configuration

AnyCheck Characteristics

EASY & FAST

It is safe by tapping directly into the healing abutment, measurement is fast (within 3 seconds) and easier compared to the RFA Type

EFFICIENT 

It can be measured for natural or implant prosthesis by tapping directly on the measuring body. As a result, it is more utilized than the RFA type not only in determining the loading time but also in early diagnosis of inflammation around the implant.

SAFE

Compared to existing hitting products, the number of hits has been drastically reduced (16 times –> 6 times), and if the fructuation level is less than 59, it is safe by automatically stopping after hitting twice.

AnyCheck Instructions

Measurement method

• Turn on AnyCheck by pressing the switch button until it turns on.
• Slightly contact the tip of the tapping rod to the upper part of the healing abutment. Be cautious not to push the healing abutment. Be cautious not to push the healing abutment.
• Maintain the contact angle between 0 to 30 degrees.
• Gently press the START button while holding the device stable.
• Check the measured value is between 30-85. The smaller the measured value, the weaker the degree of osseointegration.

Check the measured value

• Measured values 1 to 99 are displayed. (1 to 59 red, 60 to 64 orange, 65 to 99 green)
• The lower the measurement value, the greater the implant fluctuation.
• Measured values (IST scale) differ depending on the height of the healing abutment.
• As the standard height of the healing abutment is 4mm, calculate the correct IST value according to the following chart.

AnyCheck Specification